starrett指示表starrett 657

starrett指示表starrett 657

美国施泰力657系列带磁性底座指示表台架

657系列指示表台架

      底座有三个精密研磨的磁性接触面。可水平、垂直或倒置装夹。V型槽设计使得底座可以装夹到圆柱表面上。底座一面有用于安装立柱的#1/4-20螺纹孔。

      可选是否配备施泰力AGD表盘式指示表: 25-131J英制读 数指示表(分辨率0.0005"， 表盘读数0-25-0， 测量范围0.125") 或25-181J公制读数指示表(分辨率0.01mm，表盘读数0-50-0，测量范围2.5mm)。根据要求也可配备其他指示表。

A.657P磁性底座。底座尺寸为1-15/16” x1-5/8”x1-7/8”(50x40x48mm)。配备可单手操作的按键开关。

B.657G垂直立柱。直径为3/8”(9. 5mm)，长度为7-7/16”( 190mm)。

C. 657H旋转立柱转向器。允许指示表在垂直方 向上任意转动，转动范围可达360。转向器有两个3/8”(9. 5mm)安装孔。

D. PT06784-A指示表安装杆。尺寸为3/8” x9-1/2”(9.5 x 240mm) ，带有夹持指示表支耳后盖的夹紧机构。

E. F.57S和58S通用转向器。可将不同直径的划线器或指示表安装柄连接到安装杆和立柱上。

L S Starrett Company 154D

L S Starrett Company 384A

L S Starrett Company 154B

L S Starrett Company B61014-2 RECIPROCATING SAW BLADES (2/CA 锯子

L S Starrett Company B63-2 RECIPROCATING SAW BLADES (2/CARD) 锯子

L S Starrett Company B91014-2 RECIPROCATING SAW BLADES (2/CA 锯子

L S Starrett Company B4812-2 RECIPROCATING SAW BLADES (2/CAR 锯子

L S Starrett Company B6812-2 RECIPROCATING SAW BLADES (2/CAR 锯子

L S Starrett Company B6610-2 RECIPROCATING SAW BLADES (2/CAR 锯子

L S Starrett Company B41014-2 RECIPROCATING SAW BLADES (2/CA 锯子

L S Starrett Company B410-2 RECIPROCATING SAW BLADES (2/CARD 锯子

L S Starrett Company 435M-300

L S Starrett Company C434M-300

L S Starrett Company C33H-12-4RW/SLC

L S Starrett Company C434M-600

L S Starrett Company C33MEHC-600

L S Starrett Company C33MEHC-300

L S Starrett Company 10MH-150

L S Starrett Company 10MEH-150

L S Starrett Company C33MHC-600

L S Starrett Company C11H-12-4RW/SLC

L S Starrett Company ST2-24