KRACHT齿轮泵CP 2

高压齿轮泵

CP 3

排量

工作压力

速度范围Vg = 71 ...125 cm³/r

p = ...280 巴

p = ...4061 psi

n = ...2600 转/分

Construction 

Function

General product characteristics

6

Technical data 7

Type key VCA 8

Type key VCG 9

Electrical connections

Signal characteristics

10

Pressure drop charts 11 – 12

Technical drawings 13 – 15

Flow measurement overvieonsisting of two high-precision gears, the measuring 

unit is driven by the liquid flow based on the displacement principle. The gears run in an almost contactless 

manner in the measuring chamber. The bearing consists of ball and plain bearings. 

The measuring principle does not cause any pressure 

or volume flow pulsation. Because there is no need for 

settling sections on the inlet and outlet side, machines/

plants can be designed to be more compact. All moving parts are lubricated by the measuring media.

The gear movement is scanned in a contactless manner by the lid-mounted sensors. During the rotation 

of the measuring unit by one tooth pitch, a signal is 

generated per sensor that corresponds to the so-called 

geometric tooth volume Vgz. 

The plug is equipped with a pre-amplifier that converts the sensor signal into a square-wave signal which 

serves as output signal. The dual-channel scanning 

facilitates a higher measuring resolution and detection 

of the direction of flow.

I F