强劲的最终 Tier 4 兼容柴油发动机

AutoConnect™中置剪草机甲板可在不到5分钟的时间内安装或拆卸

通过简单的机具更换，将更多的时间花在工作上，减少切换设备的时间

Drive-over deck makes connection simple

Drive-over deck makes connection simple

1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.

AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.

Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.

Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.

Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.

iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat

Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.

Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.

1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.

通过双触式支脚控制装置和静液压传动 （HST） 快速轻松地改变速度和方向

Twin Touch™ pedals

Twin Touch™ pedals

The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.

Ideal for loader or mower applications where frequent direction and speed changes are needed

No clutching for fast direction changes

Match the job at hand with infinite ground speeds

出色的机动性和易于操作，采用标准四轮驱动（4WD）和动力转向

Standard 4WD and power steering make 1 Family Tractors excellent for mowing

Standard 4WD and power steering make 1 Family Tractors excellent for mowing

Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.

Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.

Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.

High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.

The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.

舒适方便的开放式操作台

Open operator's station (1025R shown)

Open operator's station (1025R shown)

The 1023E open operator station is designed for greater comfort and increased visibility.

Comfortable operation  

Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise.

Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side.

Controls are conveniently located next to the fenders and are color-coded for quick identification.

Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.

Foldable rollover protective structure (ROPS) keeps you protected during operation and improves the ability to store tractor in a garage.

Foldable Roll-Gard ROPS

Foldable Roll-Gard ROPS

Foldable Roll-Gard™ ROPS is standard equipment on 1023E.

INCREASED VISIBILITY

Standard (and optional) lighting shown

Standard (and optional) lighting shown

Sloping hood design provides improved visibility especially during front loader work

Standard lighting equipment allows you to work from early in the morning to late at night:

Two front-mounted sealed-beam halogen headlights

Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors

Built-in tail light on one warning/hazardous light

Additional front- and rear-light kits are available

INSTRUMENTATION

Instrumentation

Instrumentation

Updated instrumentation is standard equipment for operating convenience and confidence. Instrumentation includes:

Tach/hour meter

Oil-pressure indicator light

Alternator-indicator light

Flashing-warning lights

Coolant-temperature light

SUSPENSION SEAT

Suspension seat

Suspension seat

The spring suspension seat adjusts fore/aft for operator convenience. The seat adjustment lever is located in the center under the seat area. The seat flips forward for protection from the elements.

MOWER DECK HEIGHT-ADJUSTMENT KNOB

Mower deck height-adjustment knob

Mower deck height-adjustment knob

The mower deck height-adjustment knob allows the mower height to be adjusted from 2.5 cm to 10.2 cm (1 in. to 4 in.).

A spring-loaded detent ensures the height position is locked into place.

The transport lock position holds the deck 10.2-cm (4-in.) from the ground, so that rear implements can be used separately while the mower is installed.

BEVERAGE HOLDER AND ADDITIONAL STORAGE

Beverage holder and additional storage

Beverage holder and additional storage

The beverage holder is contour-molded and seated into the fender for a clean look. It is conveniently located and dual-sized to accommodate many containers. The placement of the cup holder is within arm's reach.

Additional storage is conveniently placed into the fender for loose items like keys and work gloves.

FUEL FILL AND FUEL GAUGE LOCATIONS

Fuel fill and fuel gauge locations

Fuel fill and fuel gauge locations

The fuel fill location is conveniently accessible on the left-hand side fender. The fuel gauge is located in close proximity to make the fuel refilling process easier.

操作灵活，具有多个中式割草机提升系统选项

Mid-mower lift system options

Mid-mower lift system options

MID-MOWER LIFT SYSTEM OPTIONS

Standard mechanical mower lift

The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.

Optional hydraulic mower lift

The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.

Optional independent hydraulic mower lift

The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.

For more information on this mid mower lift system click here.