RENNER泵 德国RENNER公司成立于1981年,公司的飞速发展得益于公司长期以来的经验和对新技术的不断追求,RENNER公司以泵和过滤器为两大核心产品,广泛应用于PCB及电镀领域。RENNER泵的所有部件均为公司自行生产,从而保证了产品质量的可靠性和稳定性。公司以客户需求为导向,不断革新新技术,产品已畅销世界各地,赢得广泛赞誉。
RENNER泵和过滤器的基于顶尖的设计的高质量已经被众多实例应用所证明,产品高性能,高效率,可靠耐用,安装维护方便,可干转之磁力泵,寿命长。主要应用领域有:电镀,石化,纺织和食品工业,实验室,医疗设备,蚀刻和清洗设备,制冷设备,太阳能系统,污水和水处理设备及各类机械工程。这些应用介质广泛,例如酸和碱,酸和碱的混合物,溶剂,脱脂碱性电镀浴,光化学,放射性,珍贵和具有高度腐蚀性的液体,甚至食品流体领域。
RT 系列立式离心泵
Vertical centrifugal immersion pumps RT
These pumps without sealings and safe-to-run-dry, out of fully plastic material, are expecially space-saving and are installed mainly in industrial facilities.
RT系列立式泵由塑料制成,无轴封,能干运转,在槽内安装,可节省空间。
如需要可特别安装密封,以防液体、蒸汽泄漏。但容易产生结晶。
The pumps are equipped with special seals, which prevent, also with heavily creeping solutions, the escape of steam and so the hereby created undesired crystallization.
标准的泵的浸入深度是从 200MM 到 500MM. 此外通过安装一个中间轴承,可让浸入深度达到 2500MM 。如果需要的话,也可给客户特别配置安装法兰。
As standard the pumps are equipped for immersion depths from 200mm to 500mm; in addition, by installing an intermediate bearing, immersion depths up to 2.500mm are possible. The equipment with customer-specific installation flanges is possible, if desired.
Advantages 优点
无轴封 without sealings
可安全干运转 safe-to-run-dry
可直接安装,并且节省空间 space-saving by direct installation
可节省吸入管 saving of suction pipes
可为客户提供特别的安装法兰 customer-specific installation flange
全塑料结构 construction in fully plastic material
排放接口可变化 variable discharge connection
可直接安装RENNER过滤桶 direct mounting of the RENNER filter housings
应用 Applications
电镀业 Electroplating industry
蚀刻和清洗系统 Etching and cleaning systems
制冷设备 Refrigeration machines
太阳能系统 Solar systems
废水和淡水处理 Treatment of waste water and fresh water
摄影行业 Photographic industry
纺织和食品行业 Textiles and foodstuff industry
等等 and so on流量控制器可满足你的需要。
Fluid control to suit your requirements
所有的RENNER立式泵都可以配一个集成变频器
All RENN可信服的结构特点
Convincing construction features
突出的优点来自于结构特点
The outstanding advantages in the practical use result from many construction features.
ER vertical pumps RT are available with an integrated variable speed drive.