GREISINGER 温度计 GTH 175 PT-T

GREISINGER 温度计 GTH 175 PT-T产品介绍

General

Read through this document attentively and make yourself familiar to the of the 

device before you use it. Keep this document in a ready-to-hand way in order to be 

able to look up in the case of doubt

Disposal Notice

Dispense exhausted batteries at destined gathering places.

The device must not be disposed in the unsorted municipal waste. Send 

the device directly to us (sufficiently stamped), if it should be disposed. 

We will dispose the device appropriate and environmentally sound.

Safety Instructions

This device has been designed and tested in accordance to the safety regulations 

for electronic devices. However, its trouble-free operation and reliability cannot be 

guaranteed unless the standard safety measures and special safety advises given 

in this manual will be adhered to when using it.

1. Trouble-free operation and reliability of the device can only be guaranteed if it 

is not subjected to any other climatic conditions than those stated under “Specification”.

Transporting the device from a cold to a warm environment condensation may 

result in a failure of the function. In such a case make sure the device temperature has adjusted to the ambient temperature before trying a new start-up.

2. Whenever there may be a risk whatsoever involved in running it, the device 

has to be

switched off immediately and to be marked accordingly to avoid re-starting. 

Operator safety may be a risk if:

 there is visible damage to the device

 the device is not working as specified

 the device has been stored under unsuitable conditions for a longer time

In case of doubt, please return device to manufacturer for repair or maintenance.

3. Warning: Do not use these product as safety or emergency stop device, or in 

any other application where failure of the product could result in personal injury 

or material damage.

Failure to comply with these instructions could result in death or serious injury 

and material damage.

4. Do not heat the probe over 200C